Phone : +91 9582 90 7788 | Email : sales@itmonteur.net

Register & Request Quote | Submit Support Ticket

Home » Tag: Packet-filter firewalls

Tag Archives: Packet-filter firewalls

Home » Tag: Packet-filter firewalls

Firewall

Firewall

Firewall,What is a Firewall?,Defined,Explained,Explored What is Firewall?,Fire Wall,How Firewall Technology Works?,Firewall - Computer Network Security System

Firewall,What is a Firewall?,Defined,Explained,Explored What is Firewall?,Fire Wall,How Firewall Technology Works?,Firewall – Computer Network Security System

What is Firewall?

A firewall is a network security device located between your internal network and the wider Internet. A firewall monitors incoming and outgoing network traffic – blocking or allowing it based on a set of configurable rules.

Firewalls are a fundamental piece of security and typically form the first line of defence on a network. Acting as a filter against bad connections from the outside world.

A firewall works by comparing the data sent into or out of the network against a list of rules. Based on the results of the rule checking, the firewall will then either block or allow the connection.

How does a firewall work?

Firewalls work by inspecting data packets (small chunks of data) against an internal list of rules. Here are some of the more common ones:

  • IP addresses – filter out traffic from suspicious IPs
  • Domain names – block traffic from known malicious domains
  • Ports – deny traffic trying to enter through a certain port
  • Contents – block data packets containing certain keywords

A firewall scans the contents of the packet and then determines whether to let it through based on the rules in place. On a typical network setup, all connections to the Internet flow through the firewall. Meaning it inspects all inbound or outgoing packets.

How does firewall inspection work?

The process of inspection involves comparing a packet’s contents against the firewall’s set of rules. Depending on if the rule is setup as a blacklist or whitelist, it will react differently to a match.

  • A blacklist rule will block any packets which match the criteria.
  • A whitelist rule will block any packets which don’t match the criteria.

A firewall’s rules are highly configurable. Meaning you can make the packet inspection process unique to your security setup. Here are some examples of how you could use custom firewall rules:

  • Creating a whitelist for your own company IP. Preventing any outsiders from accessing what’s behind the firewall.
  • Making a blacklist for the IP of a known malicious file server. Stopping it from distributing malware onto your network.
  • Creating a whitelist for certain domain extensions (.com, .co.uk .edu e.t.c.) on outgoing traffic. Blocking staff from accessing potentially dangerous sites.

Why are firewalls important?

Firewalls are often compared to a lock on the door to your network. But it might be more accurate to say that a firewall is the door.

Without a firewall in place, any connection can flow freely in or out of your network. Including connections from known malicious sources. This means you could experience unauthorised access to networked files. Leading to a data breach, malware infection or worse.

You need a firewall to filter out the bulk of malicious connections. And there’s a lot of malicious connections. One study found that within 52 seconds of being online, servers were being probed by hackers. With an average rate of 757 connection attempts per hour.

Are firewalls hardware or software?

Firewalls can be either a hardware appliance or a piece of software which runs on a machine. So, the answer is both.

Not helpful, I know.

But the main difference between the two is this:

  • Software firewalls tend to protect the individual machine it’s installed upon, typically a laptop or PC
  • Hardware firewalls usually protect many machines or an entire network.

What types of firewall are there?

Circuit-level

Circuit level firewalls are a type of firewall that monitors transmission control protocol (TCP) handshaking. It ensures that the communication between packets is legitimate and not malicious.

Stateful inspection

A firewall with stateful inspection considers the state of current connections when filtering packets. This means that the firewall can block the packet in one case but allowed in another. Depending on the current state of the connection.

Unified threat management (UTM)

Whilst technically not a type of firewall, UTM is instead an advanced security appliance which combines the security functions of many different security appliances. One of these being a firewall. We have an article explaining everything you need to know about UTM if you wish to learn more.

What is a next-generation firewall?

A next-generation firewall (NGFW) contains all the normal defences that a traditional firewall has and more. The most common additions are intrusion prevention software and application control. But certain vendors have other bonus security features. NGFWs are also capable of deep packet inspection which enables more robust filters.

Intrusion prevention software monitors network activity to detect and stop vulnerability exploits from occurring. This is usually done by monitoring for breaches against the network policies in place.

Application control software sets up a hard filter for programs that can send or receive data over the Internet. This can either be done by blacklist (blocks any programs in the filter) or by whitelist (blocks any programs not in the filter).

What is deep packet inspection?

Deep Packet Inspection (DPI) is a type of packet inspection which analyses the full contents of a data packet. Instead of only information in a packet’s header (where it is coming from and going to).

This enables DPI to filter out malicious packets, such as viruses and trojans, with better accuracy. As rather than only looking at the sender and destination, the packet’s contents can be used in filters as well.

This allows DPI to uncover a broader range of security threats because it will discover packets with a malicious payload but an innocuous header.

Where did the name firewall come from?

A final piece of trivia: the name firewall originated from the real-world application of fire partitions used in buildings. These would be walls that were implemented into a building to act as a barrier to stop fire spreading from one room to another.

The similarity between a fire spreading through a building and a computer virus spreading through a network prompted the same name to be adopted for the network device.

FAQ

Top Best Firewall Companies in India : Check Point. FortiGate. Palo Alto Networks. WatchGuard. Seqrite Firewall. Cisco Asa Firepower. Cisco PIX. Mcafee Firewall.
Firewalls provide protection against outside cyber attackers by shielding your computer or network from malicious or unnecessary network traffic. Firewalls can also prevent malicious software from accessing a computer or network via the internet.
There are three basic types of firewalls that are used by companies to protect their data & devices to keep destructive elements out of network, viz. Packet Filters, Stateful Inspection and Proxy Server Firewalls. Let us give you a brief introduction about each of these.
A firewall is a security device — computer hardware or software — that can help protect your network by filtering traffic and blocking outsiders from gaining unauthorized access to the private data on your computer.
Firewalls provide protection against outside cyber attackers by shielding your computer or network from malicious or unnecessary network traffic. Firewalls can also prevent malicious software from accessing a computer or network via the internet.
A firewall is a protective measure that safeguards an individual's or company's computer network. It provides two basic security functions, including packet filtering, which inspects traffic at the packet level, and acting as an application proxy, providing security measures at the application level.

Firewall

Sales Number : +91 9582 90 7788
Support Number : +91-9654016484
Sales Email : sales@itmonteur.net
Support Email : support@itmonteur.net

Register & Request Quote
Submit Support Ticket

Read More »

Information Security - InfoSec - Cyber Security - Firewall Providers Company in India

 

What is Firewall? A Firewall is a network security device that monitors and filters incoming and outgoing network traffic based on an organization's previously established security policies. At its most basic, a firewall is essentially the barrier that sits between a private internal network and the public Internet.

 

Secure your network at the gateway against threats such as intrusions, Viruses, Spyware, Worms, Trojans, Adware, Keyloggers, Malicious Mobile Code (MMC), and other dangerous applications for total protection in a convenient, affordable subscription-based service. Modern threats like web-based malware attacks, targeted attacks, application-layer attacks, and more have had a significantly negative effect on the threat landscape. In fact, more than 80% of all new malware and intrusion attempts are exploiting weaknesses in applications, as opposed to weaknesses in networking components and services. Stateful firewalls with simple packet filtering capabilities were efficient blocking unwanted applications as most applications met the port-protocol expectations. Administrators could promptly prevent an unsafe application from being accessed by users by blocking the associated ports and protocols.

 

Firewall Firm is an IT Monteur Firewall Company provides Managed Firewall Support, Firewall providers , Firewall Security Service Provider, Network Security Services, Firewall Solutions India , New Delhi - India's capital territory , Mumbai - Bombay , Kolkata - Calcutta , Chennai - Madras , Bangaluru - Bangalore , Bhubaneswar, Ahmedabad, Hyderabad, Pune, Surat, Jaipur, Firewall Service Providers in India

Sales Number : +91 9582 90 7788 | Support Number : +91-9654016484
Sales Email : sales@itmonteur.net | Support Email : support@itmonteur.net

Register & Request Quote | Submit Support Ticket