Aruba 203R Series Access Point

  • Hardware variants
    • AP-585EX
    – Built in omni-directional antennas (H and V polarized)
  • AP type: Indoor, flexible radio:
    – 5GHz 802.11ac 2×2 MIMO OR 2.4GHz 802.11n,2×2 MIMO1, 
  • POWER
     PoE-PD device (and internal losses); this could add up
    to 5.7W for a 5W/1A USB device and up to 17.2W
  • Reliability
    •  MTBF at +25C operating temperature:
    – AP-203R: 539,000 hours (62 years)
  • WARRANTY: Limited lifetime warranty
  • • USB 2.0 host interface (Type A connector, top)
    – 3G/4G cellular modems
    – Device battery charging port

Description

Aruba 203R Series Access Point

Multifunctional connectivity for home and small branch offices

The multifunctional 203R Series remote APs support both wall-box and desk-mount deployments, delivering secure and fast 802.11ac wireless and wired network access to corporate resources.

Easy to set up, easy to use

With no IT support required, the 203R Series APs deliver remote access point (RAP) benefits from the convenience of a small office or home.

Policy-based access control

Dynamic Segmentation enforces real-time, device-level access policies on Aruba wired and wireless networks.

Built-in Bluetooth Low-Energy (BLE) radio

Provides location-based services with BLE-enabled mobile devices receiving signals from multiple Aruba beacons at the same time.

Top-located USB port for support of USB cellular modem

The 203R Series access point enables the use of cellular modems to provide either backup or primary internet connectivity for remote access point (RAP) support and for client WLAN access, via a USB port located on the top of the access point for maximum flexibility.

Flexible radio architecture

The 203R Series APs flexible software configuration allows it to seamlessly switch between modes where the radio resources are either combined in a single 2×2 radio or separated into two 1×1 radios.

Wi-Fi Radio Specifications
  • AP type: Indoor, flex radio:
    • 5GHz 802.11ac 2×2 MIMO OR 2.4GHz 802.11n 2×2 MIMO1, or
    • 5GHz 802.11ac 1×1 AND 2.4GHz 802.11n 1×11
  • Software-configurable radio supports 5GHz (Radio 0) and/or 2.4GHz (Radio 1)
  • 5GHz: Two spatial stream Single User (SU) MIMO for up to 867Mbps wireless data rate to individual 2×2 VHT80 client devices
  • 2.4GHz: Two spatial stream Single User (SU) MIMO for up to 400Mbps wireless data rate to individual 2×2 VHT40 client devices (300Mbps for HT40 802.11n client devices)
  • Support for up to 256 associated client devices per radio, and up to 16 BSSIDs per radio
  • Supported frequency bands (country-specific restrictions apply):
    • 2.400 to 2.4835GHz
    • 5.150 to 5.250GHz
    • 5.250 to 5.350GHz
    • 5.470 to 5.725GHz
    • 5.725 to 5.850GHz
  • Available channels: Dependent on configured regulatory domain
  • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
  • Supported radio technologies:
    • 802.11b: Direct-sequence spread-spectrum (DSSS)
    • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
  • Supported modulation types:
    • 802.11b: BPSK, QPSK, CCK
    • 802.11a/g/n/ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
  • Transmit power: Configurable in increments of 0.5 dBm
  • Maximum (conducted) transmit power (limited by local regulatory requirements):
    • 2.4GHz band: +18 dBm per chain, +21 dBm aggregate (2×2 mode)
    • 5GHz band: +18 dBm per chain, +21 dBm aggregate (2×2 mode)
    • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
  • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
  • Maximum ratio combining (MRC) for improved receiver performance
  • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
  • Short guard interval for 20MHz, 40MHz and 80MHz channels
  • Space-time block coding (STBC) for increased range and improved reception
  • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
  • Transmit beam-forming (TxBF) for increased signal reliability and range
  • Supported data rates (Mbps):
    • 802.11b: 1, 2, 5.5, 11
    • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    • 802.11n: 6.5 to 300 (MCS0 to MCS15)
    • 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80)
  • 802.11n high-throughput (HT) support: HT 20/40
  • 802.11ac very high throughput (VHT) support: VHT 20/40/80
  • 802.11n/ac packet aggregation: A-MPDU, A-MSDU
Other Interfaces
  • Uplink: 10/100/1000BASE-T Ethernet (RJ-45, back)
    • Auto-sensing link speed and MDI/MDX
    • 802.3az Energy Efficient Ethernet (EEE)
  • Local: Two 10/100/1000BASE-T Ethernet (RJ-45, back)
    • Auto-sensing link speed and MDI/MDX
    • 802.3az Energy Efficient Ethernet (EEE)
    • One port (E2): PoE-PSE (output): 48 Vdc (nominal) 802.3af PoE (AP-203RP models)
  • Bluetooth Low Energy (BLE) radio
    • Up to 4dBm transmit power (class 2) and -93dBm receive sensitivity
    • Integrated antenna with moderately directional pattern and peak gain of 1dBi
  • USB 2.0 host interface (Type A connector, top)
    • 3G/4G cellular modems
    • Device battery charging port
    • Capable of supplying up to 1A/5 watts of power to an attached device
  • AC power interface, 2 prong IEC 60320-1 C8 receptacle (back)
  • Visual indicators (LEDs, front):
    • Power/system status
    • Radio status
    • Local network port status (2x)
      • Includes PoE-PSE status (AP-203RP models)
  • Reset/LED control button (“paperclip access”, bottom)
    • Factory reset (when activated during device power up)
    • LED control: toggle off/normal
  • Serial console interface (custom, uUSB physical jack, bottom)

Security

  • Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances
  • IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats
  • Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys

Networking on a budget

With the integrated BLE and supporting 802.3af power, the Series APs enable enterprises to improve their work efficiency and productivity with the lowest TCO. When Ethernet drops are not available, VPN tunnels extend remote locations to corporate resources and wireless mesh connections.

Highly secure and reliable performance

The Series APs offer improved network simplicity and security in several ways. Dynamic Segmentation automatically enforces real-time, device-level access policies on Aruba wired and wireless networks. Additionally, Aruba AppRF technology leverages deep- packet inspection to classify and block, prioritize, or limit bandwidth for over 2,500 enterprise apps or groups of apps.

Flexible management options

Available management solutions include Aruba Central (available in cloud-managed and on-premises options), as well as Aruba AirWave, which supports multi-vendor networks. APs can be deployed with zero-touch provisioning to reduce deployment time, centralize configuration, and simplify inventory management.

 

Aruba Access Point

Aruba Indoor Access Point

Aruba 303 Series Access Point

Aruba 340 Series Access Point

Aruba 500 Series Access Point

Aruba 510 Series Access Point

Aruba 530 Series Access Point

Aruba 550 Series Access Point

Aruba 610 Series Access Point

Aruba 630 Series Access Point

Aruba 650 Series Access Point

Aruba Outdoor Access Point

Aruba 318 Series Access Point

Aruba 360 Series Access Point

Aruba EX370 Series Access Point

Aruba 370 Series Access Point

Aruba 387 Series Access Point

Aruba 518 Series Access Point

Aruba 560 Series Access Point

Aruba EX560 Series Access Point

Aruba 570 Series Access Point

Aruba EX570 Series Access Point

Aruba 580 Series Access Point

Aruba Ex580 Series Access Point

Aruba Remote Access Point

Aruba 203R Series Access Point

Aruba 303H Series Access Point

Aruba 500H Series Access Point

Buy Aruba Access Point online from Firewall Firm’s IT Monteur Store

Sales Number : +91 9582 90 7788
Support Number : +91-9654016484
Sales Email : sales@itmonteur.net
Support Email : support@itmonteur.net

Register & Request Quote
Submit Support Ticket