Aruba 500H Series Access Point

DC power interface, accepts 1.35/3.5-mm center-positive
circular plug with 9.5-mm length
• AP type: Indoor, dual radio, 5GHz 802.11ac 2×2 MIMO and
2.4GHz 802.11n 2×2 MIMO1
.Direct DC power source: 48Vdc nominal, +/- 5%
• Power over Ethernet (PoE): 48 Vdc (nominal)
802.3af/802.3at compliant source
 USB 2.0 host interface (Type A connector)
– 3G/4G cellular modems
– Device battery charging port
Direct DC power source: 48Vdc nominal, +/- 5%
• Power over Ethernet (PoE): 48 Vdc (nominal)
MECHANICAL
• Dimensions/weight (unit, including single-gang wall box
mount plate):
– 86mm (W) x 40mm (D) x 150mm (H)
– 310g

Description

Aruba 500H Series Access Point

Overview:

The Aruba 500H series access points, with Wi-Fi 6 (802.11ax) technology and Aruba’s intelligent software innovations, deliver high performance connectivity for mobile and IoT devices in any environment.

The 500H series is designed to simultaneously serve multiple clients and traffic types in dense environments, and boosts overall network performance by up to 400% compared to 802.11ac APs.

The 500H series includes AI-powered RF optimization, Live upgrades, WPA3 and Enhanced Open certified security, and unified wired and wireless policy with Dynamic Segmentation.

Specifications:

HARDWARE VARIANTS
  • AP-505H
    • 5GHz: radio:
      • Two spatial stream (SU/MU) MIMO for up to 1.2Gbps wireless data rate (HE80)
    • 2.4GHz radio:
      • Two spatial stream (SU/MU) MIMO for up to 287Mbps wireless data rate (HE20)
      • Note: HE40 operation is supported in 2.4GHz, but uncommon and not recommended for enterprise deployments
WI-FI RADIO SPECIFICATIONS
  • AP type:
    • High-end dual radio Wi-Fi 6 Hospitality AP with 1+4 Ethernet ports
  • Maximum number of associated client devices:
    • Up to 256 associated client devices per radio
  • Maximum number of BSSIDs:
    • 16 BSSIDs per radio
  • Supported frequency bands (country-specific restrictions apply):
    • 2.400 to 2.500GHz (ISM) channels 1-13
    • 5.150 to 5.250GHz (U-NII-1) channels 36, 40, 44, 48
    • 5.250 to 5.350GHz (U-NII-2A) channels 52, 56, 60, 64
    • 5.470 to 5.725GHz (U-NII-2C) channels 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 144
    • 5.725 to 5.850GHz (U-NII-3) channels 149, 153, 157, 161, 165
  • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
  • Supported radio technologies:
    • 802.11b: Direct-sequence spread-spectrum (DSSS)
    • 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
    • 802.11ax: Orthogonal frequency-division multiple access (OFDMA) with up to 8 resource units
  • Supported modulation types:
    • 802.11b: BPSK, QPSK, CCK
    • 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM (proprietary extension)
    • 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM (proprietary extension)
    • 802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
  • 802.11n high-throughput (HT) support:
    • HT20/40
  • 802.11ac very high throughput (VHT) support:
    • VHT20/40/80
  • Supported data rates (Mbps):
    • 802.11b: 1, 2, 5.5, 11
    • 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
    • 802.11n: 6.5 to 300 (MCS0 to MCS15, HT20 to HT40), 400 with 256-QAM
    • 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS = 1 to 2, VHT20 to VHT80), 1,083 with 1024-QAM
    • 802.11ax (2.4GHz): 3.6 to 574 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE40)
    • 802.11ax (5GHz): 3.6 to 1,201 (MCS0 to MCS11, NSS = 1 to 2, HE20 to HE80)
  • 802.11n/ac packet aggregation:
    • A-MPDU, A-MSDU
  • Transmit power:
    • Configurable in increments of 0.5 dBm
  • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements):
    • 2.4 GHz band: +20 dBm (17 dBm per chain)
    • 5 GHz band: +21 dBm (18 dBm per chain)
    • Note: conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain
  • Minimum configurable transmit power level:
    • 0 dBm (conducted, per chain)
  • Advanced Cellular Coexistence (ACC):
    • Minimizes the impact of interference from cellular networks
  • Advanced IOT Coexistence (AIC):
    • Allows concurrent operation of multiple radios in the 2.4GHz band
  • Maximum ratio combining (MRC):
    • For improved receiver performance
  • Cyclic delay/shift diversity (CDD/CSD):
    • For improved downlink RF performance
  • Space-time block coding (STBC):
    • For increased range and improved reception
  • Low-density parity check (LDPC):
    • For high-efficiency error correction and increased throughput
  • Transmit beam-forming (TxBF):
    • For increased signal reliability and range
  • 802.11ax Target Wait Time (TWT):
    • To support low-power client devices
  • VPN IPsec throughput performance:
    • 500Mbps or better
WI-FI ANTENNAS
  • Two integrated semi-directional antennas for 2×2 MIMO with peak antenna gain of 5.0dBi in 2.4GHz and 5.4dBi in 5GHz.
    • Built-in antennas are optimized for vertical wall or desk mounted orientation of the AP.
    • Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 3.3dBi in 2.4GHz and 2.4dBi in 5GHz.
OTHER INTERFACES
  • Uplink (E0): Smart Rate Ethernet wired network port (RJ45)
    • Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX
    • 2.5Gbps speed complies with NBase-T and 802.3bz specifications
    • 802.3az Energy Efficient Ethernet (EEE)
    • PoE-PD: 802.3af/at/bt POE (class 3, 4 or 6)
  • Local (E1-E4): Four Ethernet wired network ports (RJ45)
    • Auto-sensing link speed (10/100/1000BASE-T) and MDI/MDX
    • 802.3az Energy Efficient Ethernet (EEE)
    • E1 & E2: PoE-PSE: 802.3af/at PoE output; dual 802.3af (both ports) or single 802.3at (E1 only)
  • DC power interface
    • 48Vdc (nominal, +/- 5%), accepts 1.35mm/3.5mm center-positive circular plug with 9.5mm length
  • USB 2.0 host interface (Type A connector)
    • Cellular modems
    • IOT or other plug-in accessories
    • Device battery charging port
    • Capable of sourcing up to 1A / 5W to an attached device
  • Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio
    • BLE: up to 7dBm transmit power (class 1) and -100dBm receive sensitivity (125kbps)
    • Zigbee: up to 7dBm transmit power and -97dBm receive sensitivity (250kbps)
    • Integrated semi-directional antenna with peak gain of 1.2dBi
  • Visual indicators (multi-color LEDs):
    • Power/System status
    • Radio status
    • Local network port status (4x)
    • PoE-PSE status (2x)
  • Reset button:
    • Factory reset, LED mode control (normal/off)
  • Serial console interface:
    • Proprietary, micro-B USB physical jack
POWER SOURCES AND POWER CONSUMPTION
  • Power Sources:
    • The AP supports direct DC power and Power over Ethernet
    • When both DC and PoE power sources are available, DC power takes priority over PoE
    • Power sources are sold separately; see the 500H Series Ordering Guide for details
    • When powered by DC or 802.3bt (class 6) PoE, the AP will operate without restrictions. 
    • When powered by 802.3at (class 4) PoE with the IPM feature disabled, the AP will disable the USB port (only) if PoE-PSE is enabled, and support (802.3af) PoE-PSE power on E1 only (no PSE on E2).
    • When powered by 802.3af (class 3) PoE with the IPM feature disabled, the AP will disable the USB port and PoE-PSE capability as well as ports E3 and E4. 
    • With IPM enabled, the AP will start up without restrictions, but may dynamically apply restrictions depending on the PoE budget and actual power consumption. The specific restrictions and order in which they are applied can be configured.
  • Maximum (worst-case) power consumption (without USB or PSE / max):
    • DC powered: 14W / 50W
    • PoE powered (802.3bt): 14W / 51W
    • PoE powered (802.3at): 14W / 25.5W
    • PoE powered (802.3af): 13.5W / 13.5W
  • Maximum (worst-case) power consumption in idle mode (without USB or PSE):
    • 6.2W
  • Maximum (worst-case) power consumption in deep-sleep mode (without USB or PSE):
    • 3.5W

Security

  • Integrated wireless intrusion protection offers threat protection and mitigation, and eliminates the need for separate RF sensors and security appliances
  • IP reputation and security services identify, classify, and block malicious files, URLs and IPs, providing comprehensive protection against advanced online threats
  • Integrated Trusted Platform Module (TPM) for secure storage of credentials and keys

Networking on a budget

With the integrated BLE and supporting 802.3af power, the Series APs enable enterprises to improve their work efficiency and productivity with the lowest TCO. When Ethernet drops are not available, VPN tunnels extend remote locations to corporate resources and wireless mesh connections.

Highly secure and reliable performance

The Series APs offer improved network simplicity and security in several ways. Dynamic Segmentation automatically enforces real-time, device-level access policies on Aruba wired and wireless networks. Additionally, Aruba AppRF technology leverages deep- packet inspection to classify and block, prioritize, or limit bandwidth for over 2,500 enterprise apps or groups of apps.

Flexible management options

Available management solutions include Aruba Central (available in cloud-managed and on-premises options), as well as Aruba AirWave, which supports multi-vendor networks. APs can be deployed with zero-touch provisioning to reduce deployment time, centralize configuration, and simplify inventory management.

 

Aruba Access Point

Aruba Indoor Access Point

Aruba 303 Series Access Point

Aruba 340 Series Access Point

Aruba 500 Series Access Point

Aruba 510 Series Access Point

Aruba 530 Series Access Point

Aruba 550 Series Access Point

Aruba 610 Series Access Point

Aruba 630 Series Access Point

Aruba 650 Series Access Point

Aruba Outdoor Access Point

Aruba 318 Series Access Point

Aruba 360 Series Access Point

Aruba EX370 Series Access Point

Aruba 370 Series Access Point

Aruba 387 Series Access Point

Aruba 518 Series Access Point

Aruba 560 Series Access Point

Aruba EX560 Series Access Point

Aruba 570 Series Access Point

Aruba EX570 Series Access Point

Aruba 580 Series Access Point

Aruba Ex580 Series Access Point

Aruba Remote Access Point

Aruba 203R Series Access Point

Aruba 303H Series Access Point

Aruba 500H Series Access Point

Buy Aruba Access Point online from Firewall Firm’s IT Monteur Store

Sales Number : +91 9582 90 7788
Support Number : +91-9654016484
Sales Email : sales@itmonteur.net
Support Email : support@itmonteur.net

Register & Request Quote
Submit Support Ticket